Jaguar XJS 1993-1996

Procedure

NOTE : All remote transmitters will be erased from the system, ensure you have ALL remote transmitters available during this programming procedure.

Switch ignition ON.

Switch the security switch OFF.

Switch ignition OFF.

Switch security switch ON.

Switch the security switch ON/OFF 4 times quickly within 4 seconds.

The alarm system will enter programming mode and confirm with beeps and lights flashing.

PRESS the LOCK and UNLOCK buttons on the first remote transmitter to be programmed.

The alarm will sound the HORN 1 time to confirm programming.

Repeat step 7 for the next transmitter, the HORN will sound 2 times.

Repeat step 7 for the next transmitter, the HORN will sound 3 times.

Repeat step 7 for the next transmitter, the HORN will sound 4 times.

Repeat step 7 for the next transmitter, the HORN will sound 5 times.

NOTE : The system requires 5 remote transmitters to be programmed, so if you only have 1,2,3 or 4 remote transmitters then you must program in one of them more than once to fill the memory spaces.

NOTE : Some XJS models DO NOT have a security switch, so remove the centre console containing the window switches and locate an unused connector with a BLACK and YELLOW/WHITE wires that you can short together instead of operating a switch.