Hyundai Elantra 1995-2000

Procedure

Locate the keyless entry RKE control module, drivers side, under the dash above fuse board.

Locate the BLACK and WHITE wires coming from the module.

Normally the wires are disconnected or lead to a VALET switch.

SWITCH ignition ON.

CONNECT the BLACK and WHITE wires together 13 times or use the VALET switch if connected.

PRESS button 1 on the remote transmitter.

SWITCH ignition OFF.

PRESS button 1 on the remote transmitter.

The doors should LOCK and UNLOCK to confirm programming.

SWITCH ignition ON.

CONNECT the BLACK and WHITE wires together 14 times or use the VALET switch if connected.

PRESS button 2 on the remote transmitter.

SWITCH ignition OFF.

PRESS button 1 on the remote transmitter.

The drivers door should UNLOCK, if it LOCKS then press button 1 to unlock.

PRESS button 2.

The doors should UNLOCK.