Mitsubishi Galant 1994-1998

Procedure

TRW RKE SYSTEM

NOTE : Receiver module location :

            Diamante = Near glove box.

            Eclipse = Below steering wheel, behind knee bolster panel.

            Montero = Below steering wheel, behind knee bolster panel.

            Galant = On blower motor, above glove box.

Locate the RKE programming connector, located close to the remote transmitter module.

Using a suitable jumper wire, connect the TWO programming pins together.

The doors will LOCK and UNLOCK to confirm programming mode.

Press the LOCK button on the first remote transmitter.

The doors will LOCK and UNLOCK.

Press the LOCK on the second remote transmitter.

The doors will LOCK and UNLOCK.

Remove the jumper wire.

Check all remote transmitters for correct operation.