Nissan Juke 2010-2014

Procedure

NOTE : Maximum of 4 remote transmitters can be programmed.

CLOSE all doors.

LOCK doors using the power LOCK button on the door.

Insert key into ignition and remove it 6 times within 10

NOTE : Make sure the key is fully removed each time. Timing is also very important during this step.

Insert key and turn to the ACC position within 5 seconds and press the remote control button ONCE only, the hazards lights will flash.

For additional remotes, UNLOCK then LOCK the car using the power switch on the door.

Within 5 seconds press the additional remote ONCE only, the hazards will flash.

Repeat step 5 & 6 for each additional remote controls.

End procedure with ignition OFF.