Free, program your remote

                        1998-2005 Volkswagen Passat Keyless Entry                                Remote Fob Programming Instructions


Obtain all remote transmitters for this vehicle. You will need two keys to perform this programming procedure.NOTE:the following procedure only programs the remote buttons. It does not program the key to start the car. You must have the key programmed at a dealer or locksmith.


  1. Insert master key into the ignition switch and turn the ignition switch to the ON position.
  2. Within 30 seconds: Insert 2nd key into the driver’s door lock cylinder and manually lock the driver’s door with the 2nd key.
  3. Press the LOCK or UNLOCK button
  4. After 2 seconds press the LOCK or UNLOCK button again
  5. Switch ignition to the OFF position. Programming is now complete, test remote to ensure proper function



1998-2005 Volkswagen Passat Key Programming Instructions

DIY key programmer procedure is not available for this vehicle. This vehicle requires a key diagnostic equipment such as Autel IM608 Pro, Smart Pro, AutoProPad or any other transponder key programmer to be connected to the vehicle to program the remote key fob. You will need to contact a local auto locksmith. Please follow the link below to find a locksmith near you.