Free, program your remote

                                             Ford Puma 1997-2001



NOTE : Maximum of 4 remote transmitters can be programmed.


Switch ignition to position


Wait for PATS LED in the instrument cluster to light.


Switch ignition to position 0 when LED comes ON.


NOTE : The system is now in programming mode, and you have 30 seconds to program all remote transmitters.


Remove key from ignition and point towards interior light.


PRESS and HOLD the single arrow button on the remote transmitter keep HOLDING.


Keep holding until the LED on the remote transmitter flashes, and then PRESS the double arrow button 3 times.


Release single arrow button.


The LED on the remote transmitter and the instrument cluster should both FLASH to confirm programming is complete.


Repeat steps 4 to 8 for any additional remote transmitters.


Switch ignition to position II then to 0 to exit programming mode.


Check all transmitters for operation.