Free, program your remote

                                    Mitsubishi Galant 1999-2003



Ensure the doors lock and unlock using the key.


With ignition OFF connect pins 1 and 4 of the OBD connector together using a suitable jumper pin.


Within 10 seconds of connecting the jumper switch ignition from OFF to ACCESSORY 3 times within 2 seconds.


The doors will LOCK and UNLOCK.


PRESS the LOCK or UNLOCK button on the first remote transmitter 3 times within 10 seconds of the first press.


The doors will LOCK and UNLOCK.


Repeat step 5 for additional remote transmitters.


REMOVE Jumper connection.


Check all remote transmitters for correct operation.


NOTE : ALL remote transmitters must be programmed within 1 minute of entering the programming mode.


NOTE : Programming mode will end when 4 transmitters are programmed, Jumper is disconnected or Ignition is switched ON.