Free, program your remote

                                     Nissan SX200 1995-2000


NOTE : Maximum of 4 remote transmitters can be programmed.


CLOSE all doors.


LOCK doors using the power LOCK button on the door.


Insert key into ignition and remove it 6 times within 10


NOTE : Make sure the key is fully removed each time. Timing is also very important during this step.


Insert key and turn to the ACC position within 5 seconds and press the remote control button ONCE only, the hazards lights will flash.


For additional remotes, UNLOCK then LOCK the car using the power switch on the door.


Within 5 seconds press the additional remote ONCE only, the hazards will flash.


Repeat step 5 & 6 for each additional remote controls.


End procedure with ignition OFF.