Saab 9-7X 2005-2008

Procedure

1.    CLOSE all vehicle doors.

2.    INSERT the key into the ignition.

3.    HOLD down the power UNLOCK button on the drivers door, CONTINUE to HOLD down until instructed to release.

4.    Perform steps 5 through 8 in fairly rapid succession.

5.    SWITCH the ignition switch to the ON position.

6.    SWITCH the ignition switch to the OFF position.

7.    SWITCH the ignition switch to the ON position.

8.    SWITCH the ignition switch to the OFF position.

9.    RELEASE the power UNLOCK button on the door panel. The vehicle will LOCK and UNLOCK the doors.

10. HOLD down the LOCK and UNLOCK buttons on the remote transmitter together until the doors LOCK and UNLOCK.

11. This may take up to 30 seconds.

12. Repeat step 10 for each additional remote transmitters.

13. SWITCH ignition to the ON position to exit the programming mode.

14. TEST all remote transmitters for correct operation.