Nissan Quest 1996-1998

Procedure

Enter the vehicle, CLOSE and LOCK all doors.

INSERT and REMOVE KEY from the IGNITION 6 times within 10 seconds.

The TAIL LIGHTS should flash to indicate original codes have been erased.

TURN ignition to ACC position.

Press LOCK button on the first remote transmitter to be programmed.

TAIL lights will flash to confirm programming.

To program additional remote transmitters, UNLOCK and then LOCK the doors using the power lock

switch located on the drivers door.

Press LOCK button on the next remote transmitter to be programmed.

Repeat for up to 4 remote transmitters.

Open drivers door and turn ignition OFF.