Nissan Qashqai 2007-2013

Procedure

NOTE : Maximum of 4 remote transmitters can be programmed.

Switch ignition from position 0 to ON 6 times within 10 seconds.

Switch ignition OFF, but leave key in ignition.

After 2 seconds the vehicle will enter programming mode and will flash the warning lights twice.

PRESS and HOLD the UNLOCK button on the first remote transmitter, and PRESS the LOCK button 3 times.

RELEASE the UNLOCK button.

The warning lights will flash once to confirm remote transmitter is programmed.

Repeat steps 4 to 6 for additional remote transmitters.

Once complete, switch ignition ON and warning lights will flash 2 times.

Check all remote transmitters for operation.