Free, program your remote

                                     Suzuki Swift 2004-2011



Procedure


Confirm that all doors are CLOSED and ignition key is OUT of ignition.

 

Open driver side door.

 

Turn ignition switch to ON position, and then remove ignition key from ignition within 10 seconds.

 

Push and release driver side Door Open Sensor switch 3 times by hand within 20 seconds after removing ignition key.

 

Turn ignition switch to ON position, and then remove ignition key from ignition key cylinder within 10 seconds.

 

NOTE : All doors automatically lock and unlock once. It is now in registration mode.

 

Press UNLOCK button on the transmitter within 20 seconds after Step 5.

 

NOTE : All doors automatically lock and unlock once. Now transmitter registration is completed.

 

If an additional transmitter needs to be programmed repeat the procedure from Step 1.

 

NOTE : This procedure needs to be performed very quickly.

 

NOTE : It is understood that only 2 remotes can be programmed in. If a third is added, the first will be forgotten.